Point to Point  & Point to Multipoint  Radio for Non-Line-of-Sight Communication
OFDMA Wireless Connectivity in Sub-6GHz Bands

High-capacity Point-to-Point (PtP) and Point-to-Multipoint (PtMP) series are innovate high-capacity Wireless Backhaul solution, excellent for operation in heavily congested unlicensed & licensed bands in Sub-6GHz where spectrum resource is scare.Delivering up to 600Mbps per sectors is the ideal choice for last mile connectivity, and high-end applications requiring guaranteed SLA. It ensures revenue growth for residential and enterprise service provider by delivering fiber-like connectivity with incomparable resiliency.

Delivers fiber-like connectivity for residential and enterprise

  • Carriers & ISPs
    We offer  an excellent revenue generator ptp & ptmp for carrier and ISPs, looking to deploy telecom grade fiber-class wireless access and backhaul in licensed and unlicensed sub-6GHz bands for:
     Last mile connectivity
     xDSL replacement
     Sub-urban and rural FTTH alternative
     Fiber backup
     WiFi hot spot backhaul
     DSLAMs backhaul
     Smallcell Backhaul
  • Government & Enterprise Networks
    We offer wireless broadband infrastructure for government, public safety and enterprise network required to work in semi-licensed or congested unlicensed spectrum in urban or suburban areas.Our PtP & PtMP solution dramatically reduces the total cost of ownership and secures stable and reliable connectivity for the following applications:
     Connectivity of high definition video surveillance
     Long range building-to-building connectivity
     Mission critical broadband applications
     Real-time SCADA data transmission
     Industrial infrastructure monitoring & control (Oil and Gas, Utilities)
     Leased line replacement
  • Supports various unlicensed band as 2.4/3.5/5.8GHz, also supports customized frequency from 220MHz to 6GHz
  • High-capacity Base Station (BS): Up to 600Mbps aggregate per sectors, 2.4Gbps per cell (4 sectors using 2*80MHz)
  • Variety of Subscriber Unit (SU): 10, 25, 50, 100, 150, 300Mbps aggregate throughput
  • Flexible channel bandwidth as 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz, 40MHz
  • Advanced OFDM & MIMO 2*2 for LOS/nLOS/NLOS performance, high spectral efficiency as up to 7.5bps/Hz
  • Max RF Tx Power is up to 25dBm
  • Supports Point-to-Point and Point-to-Multipoint
  • Up to 64 concurrent Subscriber Unit and other 64 standby Subscriber Unit per Base Station / Sector
  • Modulation types: support QPSK to 256QAM and ACM (Adaptive Modulation and Coding)
  • Supports moving platform with high speeds of up to 500Km/hours
  • Low jitter & low latency
  • TDD radio synchronization enables dense deployments with maximum performance, using built-in GPS it prevents mutual interference and increase network capacity and range
  • High durability – IP66/67 enclosure
  • Support high gain integrated antenna internally or external high gain antenna
  • Dynamic Bandwidth Allocation (DBA) optimally maximizes throughput for active users demanding various service levels
  • Excellent operation in LOS /nLOS/NLOS conditions
General Technical Specifications
  • Frequency Bands 2.4/3.5/5.8GHz
  • Maximum Net Aggregate Capacity
    • High-Capacity Base Station (BS):150Mbps, 300Mbps, 600Mbps
    • High-Capacity Subscriber Unit (SU):10, 25, 50, 100, 150, 300Mbps
    • Number of SUs per BS: Up to 64 concurrent SUs and other 64 standby SUs simultaneously
    • Channel Bandwidth 1.4/3/5/10/15/20/40MHz configurable, Dynamic Channel BW selection
  • Radio and Modem
    • Modulation
      • QPSK ~ 256QAM
      • Fixed mode or Adaptive Coding and Modulation (ACM), hitless auto-rate support
    • Automatic Transmit Power Control(ATPC) : 20dB
    • TDD Synchronization  : Inter & Intra site synchronization, embedded GPS receiver
    • DFS (FCC & ETSI) : Support
    • Radio Access Scheme : OFDM, Auto MIMO 2×2
    • Adaptive Modulation & Coding : Support
    • SLA Management:CIR, MIR, Best-Effort
    • Latency : Max 10msec
    • Duplex Technology :TDD
    • Uplink/Downlink BW: Allocation Configurable: Symmetric or Asymmetric
    • Encryption:AES 128 / AES 256
  • Management
    • Network Management SNMP V3 Protocol, Telnet, HTTP, IPv4 & IPv6
    • Local Management WEB LCT, 10/100 Base-T(X) interface
  • RF Tx & Rx
    • Max Tx Power 25dBm at BS & SU
    • Embedded Antenna : Frequency Range 5.2-5.9GHz , Gain 14 dBi
    • Typical Receive Sensitivity
      • QPSK -96dBm
      • 16QAM -90dBm
      • 64QAM -84dBm
      • 256QAM -78dBm
    • Tx Power Control Range:20dB
    • Tx Power Control Step: 0.5dB
    • Rx Overload:-5dBm
  • Interface & Networking
    • Ethernet Interface : Type 10/100/1000Base-T, support PoE
    • Sub Convergence Layer : Layer 2 (Bridging learning of 4K MAC addresses)
    • QoS Support
    • VLAN:802.1Q and QinQ
  • Test & Approvals
    • Radio Spectrum EN 301 893, EN 302 326-2, EN 302 502
    • Safety EN 60950-1, EN 60950-22
    • EMC EN 301 489-1, EN 301 489-4
  • Mechanical, Electrical & Environment
    • Operating Voltage : 12VDC or 24VDC or PoE
    • Power Consumption : Max 30Watts
    • Dimension : 270×300×95mm
    • Weight:Max 2.5KG
    • Operating Temperature: -10 degree C to +60 degree C
    • Operating Humidity :0~100%
    • IP Protection:IP67

* All specifications are typical values unless otherwise stated and are subjected to change without notice.

Order Information
Part Number Description Mode Max Data Throughput Remark
RK-600BS-A Base Station (BS) Point-to-Multipoint 600Mbps
RK-600BS-B Base Station (BS) Point-to-Multipoint 300Mbps
RK-600BS-C Base Station (BS) Point-to-Multipoint 150Mbps
RK-600SU-A Subscriber Unit (SU) Point-to-Multipoint 300Mbps
RK-600SU-B Subscriber Unit (SU) Point-to-Multipoint 150Mbps
RK-600SU-C Subscriber Unit (SU) Point-to-Multipoint 100Mbps upgradable to 150Mbps
RK-600SU-D Subscriber Unit (SU) Point-to-Multipoint 50Mbps
RK-600SU-E Subscriber Unit (SU) Point-to-Multipoint 25Mbps upgradable to 25 Mbps
RK-600SU-F Subscriber Unit (SU) Point-to-Multipoint 10Mbps upgradable to 25 Mbps

Take the next step. Contact Us